OC404-1 CTD Dimensional processing by Olga



CON files used for processing:
------------------------------

1. CON file used for Stations #1 and #2 processing: 

Filename: OC404_1_dim_olga_sts_1_2_final.con
Source:   OC404-1_ISUS_0_100_right.con


2. CON file used for Stations #9 processing: 

Filename: OC404_1_deep_dim_olga_st_9_final.con
Source:   OC404-1_deep.con
NOTE: Voltages 2, 4 and 5 are free (sensors have been removed)


3. CON file used for Stations ## 3:65 (excluding stations #9) processing: 

Filename: OC404_1_dim_olga_sts_3_65_final.con
Source:  OC404-1_ISUS_0_10_right.con 
NOTE from Dennis' email 5/5/2007:


NOTES from the cruise:

ISUS sensitivity changed from 0-100 to 0-10 micromolar.Configuration files:
    OC404-1_ISUS_0_100_wrong.con (originally used for casts 1 and 2)
    OC404-1_ISUS_0_100_right.con (casts 1+2 need to be reprocessed with this)
    OC404-1_ISUS_0_10.con (starting with cast 3)


CHANGES in the FINAL processing CON files in comparison with the source CON files:
----------------------------------------------------------------------------------
1. The name of sensor connected with Voltage 1 changed from "Fluorometer" to "UserPoly0". Automatically Voltages 4 and 5 sensors become "UserPoly1" and "UserPoly2" (originaly "UserPoly0" "UserPoly1").

Fluorometer calibration coefficients have been corrected:
    to fit the difference between the formulas used by Seabird Seasoft for "UserPoly0" and "Fluorometer";
    to fit Bottles Chlorophyll a plus Phaeopigments data.

2. Oxygen calibration coefficients Soc and Voffset have been corrected - calculated at minimum(chi), where 

chi=sum((OxyCTD-OxyWinkler)^2/OxyWinkler).


NEW Module added to Processing - Align CTD to advance Oxygen relative to Pressure with delay time mean_DT=6sec:
----------------------------------------------------------------------------------
mean_DT is the average of DT calculated for each of 10 stations from the OC404-1 cruise with DT=1:10 seconds at minimum of sum((OxyDown-OxyUp)^2).